An ICRF strap antenna solution exploiting the high impedance technique

Ion Cyclotron Range of Frequencies (ICRF) strap antennas are routinely adopted in most of the existing nuclear fusion experiments, even though their main goal, i.e. to couple high power to the plasma (MW), is often limited by rather severe drawbacks due to high fields on the antenna itself and on unmatched part of the feeding lines directly connected to the antenna. In this work, we propose, describe, prototype and measure an ICRF strap antenna based on the high impedance surfaces concept that is matched at a specific tunable frequency. The adopted high-impedance structure, positioned between the strap and the backwall, is a metallic patch displaced on top of a dielectric block and grounded by means of a vertical post, in a mushroom-like shape. This structure presents a high impedance, within a given very narrow frequency band, such that the image currents are in-phase with the currents of the strap itself, thus determining a significant efficiency increase. After a general description on the properties of high impedance surfaces applied to ICRF antennas, we describe the optimization steps, carried on by means of numerical codes, to define an antenna configuration suitable for a nuclear fusion experiment. The antenna has been then manufactured and measured; strengths and weaknesses of the proposed solution are outlined

TOPLHA: an accurate and efficient numerical tool for analysis and design of LH antennas

This paper presents a self-consistent, integral-equation approach for the analysis of plasma-facing lower hybrid (LH) launchers; the geometry of the waveguide grill structure can be completely arbitrary, including the non-planar mouth of the grill. This work is based on the theoretical approach and code implementation of the TOPICA code, of which it shares the modular structure and constitutes the extension into the LH range. Code results are validated against the literature results and simulations from similar code

An Innovative Harmonic Radar to Track Flying Insects: the Case of Vespa velutina

Over the last 30 years, harmonic radars have been effective only in tracking insects flying at low altitude and over flat terrain. We developed an innovative harmonic radar, implementing the most advanced radar techniques, which covers a large field of view in elevation (with an angular aperture of about 24°) and can track insects up to a range of 500 m. We show all the components of this new harmonic radar and its first application, the tracking of Vespa velutina (yellow-legged Asian hornet). This is an invasive species which, although indigenous to South-East Asia, is spreading quickly to other regions of the world. Because of its fast diffusion and the serious threat it poses to both honeybee colonies and to humans, control measures are mandatory. When equipped with a small passive transponder, this radar system can track the flight trajectory of insects and locate nests to be destroyed. This tool has potential not only for monitoring V. velutina but also for tracking other larger insects and small size vertebrates

Benchmark between antenna code TOPICA, RAPLICASOL and Petra-M for the ICRH ITER antenna

ITER will be equipped with three plasma heating systems: neutral beam (NB), electron cyclotron (EC), and ion cy-clotron resonance heating (ICRH). The latter consists of two identical ICRH antennas to deliver 20 MW to the plasma (baseline, upgradable to 40 MW). ICRH will play a crucial role in the ignition and sustainment of burning plasmas in ITER. A high fidelity and robust modeling effort to understand the interaction of the IC waves with the scrape-off-layer (SOL) plasma is a very important aspect. Among the main important research topics, we have the assessment of the antenna loading for different plasma scenarios, the role of the lower hybrid resonance in front of the antenna and how to include it in our models, and the RF sheath boundary conditions to evaluate the antenna impurity generation. In this work, we tackle the first of these by reporting on ICRF simulations employing the Petra-M code, which is an electromagnetic simulation tool for modeling RF wave propagation based on MFEM [http://mfem.org] for the ITER ICRH antenna. Moreover, a benchmark between the well tested antenna codes TOPICA, RAPLI-CASOL, which is based on COMSOL [www.comsol.com], and the Petra-M code is also presented. S- and Z-matrices and wave electric field are compared showing an excellent agreement among these codes

An harmonic radar prototype for insect tracking in harsh environments

Harmonic entomological radars have been used in the last decades to track small and lightweight passive tags carried by various insects, usually flying at low altitude and over flat terrain. Despite being exploited in many applications, not a lot of progress was achieved in terms of performances over the years. This paper reviews the research work done in this topic throughout the European LIFE project STOPVESPA, from 2015 to 2019. The main objective of LIFE STOPVESPA was to contain the invasive Asian hornet (Vespa velutina) and prevent it from further invading Italy. Among the foreseen activities, a new harmonic radar has been developed as an effective tool to locate the hornets nests to be destroyed. A preliminary prototype, based on a magnetron generator, was tested in 2015, showing a detection range of about 125 m. A first upgrade of this prototype was released in 2016, allowing to increase the detection range up to 150 m. A new approach, based on a solid state power amplifier and a digitally modulated signal, was then adopted for the second prototype developed in 2017 and extensively run in 2018; the detection range raised to 500 m. A last engineered prototype was eventually built for the 2019 summer campaign with additional improvements. This tool has been extensively validated over the last years with the Asian hornet but it has potential for tracking and monitoring many other flying insects

Recent analysis of the ITER ion cyclotron antenna with the TOPICA code

Plasma heating in the Ion Cyclotron Range of Frequencies (ICRF) is adopted in most of the existing nuclear fusion experiments and is also one of the three auxiliary heating systems of ITER. Two identical ICRF antennas will be installed in ITER with the aim of delivering 10MW per antenna to the plasma for the baseline design configuration (upgradable to 20 MW/antenna). In order to optimize the feeding circuit and to evaluate and predict the overall performances of an ICRF launcher it is fundamental to perform radio-frequency simulations of the antenna detailed geometry loaded with a realistic plasma, and to extract the antenna input parameters, the electric current on conductors and the radiated field. In this work, we analyze the current ITER ICRF launcher, for the first time including the surrounding cavity between the port plug and the port extension, and a portion of the blanket tiles in the TOPICA code; the geometrical description of the antenna has reached an unprecedented level of accuracy. The ITER ICRF antennas have been the object of a comprehensive analysis, varying the working frequency, the plasma conditions and the poloidal and toroidal phasings between the feeding transmission lines. The performances of the antennas have been documented in terms of input parameters, power coupled to plasma and electric fields, for a reference set of ITER plasma equilibria and assuming a maximum voltage on the system

Tracking the invasive hornet Vespa velutina in complex environments by means of a harmonic radar

An innovative scanning harmonic radar has been recently developed for tracking insects in complex landscapes. This movable technology has been tested on an invasive hornet species (Vespa velutina) for detecting the position of their nests in the environment, in the framework of an early detection strategy. The new model of harmonic radar proved to be effective in tracking hornets either in open landscapes, hilly environments and areas characterised by the presence of more obstacles, such as woodlands and urban areas. Hornets were effectively tracked in complex landscapes for a mean tracking length of 96 ± 62 m with maximum values of ~ 300 m. The effectiveness of locating nests was 75% in new invasive outbreaks and 60% in highly density colonised areas. Furthermore, this technology could provide information on several aspects of insect’s ecology and biology. In this case, new insights were obtained about the mean foraging range of V. velutina (395 ± 208 m with a maximum value of 786 m) and flying features (ground speed), which was 6.66 ± 2.31 m s−1 for foraging individuals (hornets that are not carrying prey’s pellet) and 4.06 ± 1.34 m s−1 for homing individuals

On the rehydration of organic layered double hydroxides to form low-ordered carbon/LDH nanocomposites

Low-ordered carbon/layered double hydroxide (LDH) nanocomposites were prepared by rehydration of the oxides produced by calcination of an organic LDH. While the memory effect is a widely recognized effect on oxides produced by inorganic LDH, it is unprecedented from the calcination/rehydration of organic ones. Different temperatures (400, 600, and 1100 °C) were tested on the basis of thermogravimetric data. Water, instead of a carbonate solution, was used for the rehydration, with CO2 available from water itself and/or air to induce a slower process with an easier and better intercalation of the carbonaceous species. The samples were characterized by X-ray powder diffraction (XRPD), infrared in reflection mode (IR), and Raman spectroscopies and scanning electron microscopy (SEM). XRPD indicated the presence of carbonate LDH, and of residuals of unreacted oxides. IR confirmed that the prevailing anion is carbonate, coming from the water used for the rehydration and/or air. Raman data indicated the presence of low-ordered carbonaceous species moieties and SEM and XRPD the absence of separated bulky graphitic sheets, suggesting an intimate mixing of the low ordered carbonaceous phase with reconstructed LDH. Organic LDH gave better memory effect after calcination at 400 °C. Conversely, the carbonaceous species are observed after rehydration of the sample calcined at 600 °C with a reduced memory effect, demonstrating the interference of the carbonaceous phase with LDH reconstruction and the bonding with LDH layers to form a low-ordered carbon/LDH nanocomposite